TORCAP V Series · Vacuum and Gas Flush Packaging

Vacuum Sealing Machines

Pull the air out of the bag or flush it with nitrogen: slow oxidation and extend shelf life for nuts, coffee, meat and dry food.

A vacuum sealing machine draws the air out of the pack and cuts the product off from oxygen; gas flush models then fill the bag with nitrogen to extend shelf life even further. The desktop TORCAP V126 is the economical entry for small workshops; the V150G and double-bar V250UG add nitrogen flushing; the conveyor-fed TORCAP VAGAS fills fragile products with nitrogen without crushing them and prints the date while sealing. Stainless body, 2-year warranty and free testing in Istanbul with your own bags.

12+ Years in the FieldVacuum + Nitrogen in One MachineStainless Body2-Year Warranty
CONVEYOR · NITROGEN + VACUUM + CODING
TORCAP VAGAS gas flush vacuum date coding conveyor bag sealing machine
TORCAP V150G
TORCAP V150G in Action
Vacuum, Nitrogen or Conveyor?

The right vacuum machine in three tiers

The choice is set by how fragile the product is and your daily count: strong suction for hard products, gentle nitrogen fill for fragile ones, a conveyor for serial production.

01 · Entry

Desktop Vacuum

A compact stainless framed body for small workshops and artisan production. Place the bag on the bar, pull the air out and seal with a 5 mm seam; 10 m³/hour vacuum capacity.

Model: TORCAP V126 · 26 cm bar · 5 mm seal
MOST POPULAR
02 · Gas Flush

Vacuum + Nitrogen Fill

After pulling the air out it flushes the bag with nitrogen to extend shelf life; a 10 mm wide seal on a 49 cm bar. The V150G has a digital display; the V250UG seals two bags at once with its double bar and rolls along the line on its wheeled long chassis.

Models: TORCAP V150G · TORCAP V250UG (2 × 49 cm)
03 · Conveyor & Date Coding

Nitrogen Fill + Date Coding

Serial sealing on a conveyor at 0–12 m/min: gas fill + seal or vacuum + seal mode. It prints the date in solid ink while sealing; no separate coder needed. For nuts, chips and coffee.

Model: TORCAP VAGAS · consumable: MURTO 16

Fragile product warning: the suction of the V150G and V250UG can compress products such as chips and dried fruit; for those, choose the VAGAS, which gently fills with nitrogen and seals.

Installation and Operation Video

On the TORCAP V series: power connection, vacuum/gas/seal time settings, 3-level heat selection, cheese and 5 kg packaging test, pump oil and heating element replacement. The steps apply to the V126, V150G and V250UG.

More videos on our YouTube channel →
Compare the Models

The right vacuum machine for your product and speed

Bar length, seal width, nitrogen flush and coding: compare the four TORCAP models side by side.

Model
Type
Bar / Jaw
Seal
Nitrogen
Coding
Best For
Desktop, framed stainless
26 cm single bar
5 mm
—
—
Small production / workshop · 10 m³/hour vacuum
Desktop / stand, thick stainless
49 cm single bar
10 mm
Nitrogen flush
—
Hard / durable products such as coffee, legumes, meat · shelf life
Wheeled long chassis, stainless
2 × 49 cm double bar
10 mm
Nitrogen flush
—
Two bags at once · large-scale packaging
Semi-automatic conveyor · 0–12 m/min
Dual heating jaws · 0–300 °C
10 mm
Nitrogen fill or vacuum (two modes)
Yes (solid ink)
Nuts, chips, coffee — without crushing fragile products

All models: 220V mains power · stainless body · 2-year warranty · spare parts from stock · free testing in Istanbul with your own bags.

Live Production Videos

See Our Machines in the Field

Short clips filmed in real production, with real packaging and real products.

← swipe →

TORCAP V series vacuum sealer — setup and usage

YouTube · setup and usage guide

TORCAP V126 →

TORCAP V150G in Action

Real footage

TORCAP V150G →

Nitrogen-flush vacuum bag sealing with date coding

YouTube video

TORCAP VAGAS →
Setup & usage videos → our YouTube channel

Why TORCAP?

Cold-pressed, weld-free frame: none of the leak risk from weld cracks seen on cheap equivalents.

Sealing transformer with 3 independent outputs: with the low / medium / high power choice, thin packaging does not burn and thick packaging does not need long seal times.

Watch the vacuum level on the pressure gauge; cut the vacuum instantly and release the pressure with the emergency stop.

A spare heating element and a maintenance tool kit ship with the machine; the first fill of pump oil is on us.

Frequently Asked Questions

Everything You Wonder About Vacuum Sealing Machines

Vacuum or nitrogen gas; which should I choose?

Vacuum draws the air out of the pack: the volume shrinks and the product is isolated from air and moisture; it suits hard products such as coffee, legumes and meat. Nitrogen flush fills the bag with nitrogen after the air is removed; fragile products such as chips and dried fruit are packed in a protective atmosphere without being crushed. The V150G and V250UG add nitrogen on top of strong suction; the VAGAS gently fills with nitrogen and seals.

Which bags can be sealed on a vacuum machine?

Heat-sealable (laminated) vacuum bags and pouches. The V126 makes a 5 mm seal, the V150G / V250UG and VAGAS a 10 mm airtight seal; on the VAGAS the 0–300 °C temperature setting adapts to different bag thicknesses. Not sure? Bring your sample to our Istanbul test center and we will test it free of charge.

Is a separate nitrogen cylinder needed?

Yes. Gas flush models connect to an external nitrogen source; the VAGAS has an 8 mm gas inlet. We advise on the source and the connection.

How is a vacuum machine maintained?

Replacing the vacuum pump oil and the heating element roughly every 6 months, depending on how heavily the machine is used, is enough. Both jobs take a few minutes once the rear cover is removed; our installation video shows them step by step.

Can the sealing heat be set to the bag thickness?

Yes. The TORCAP V series has a transformer with 3 independent outputs; the low level is chosen for thin bags and the high level for thick ones. The sealing time is also set to the second.

Does a vacuum machine print the date too?

The conveyor-fed TORCAP VAGAS prints the date in solid ink on the bag while sealing; no separate coder is needed, and its consumable is the MURTO 16 ink roller. The desktop V126, V150G and V250UG do not code; alongside them, see our date coding machines.

Let's pick the right mode and model for your product together.

Related Categories

Sealing without vacuum, and spare parts

If you don't need vacuum for shelf life, the conveyor TORCAP series seals and codes the bag; consumables and spare parts ship from stock.

Bag Sealing Machines

15 TORCAP models from manual desktop to date-coding conveyor systems; for nylon, aluminum, kraft and doypack bags.

Bag Sealing →

Spare Parts

Teflon belts, gear belts and the VAGAS's MURTO 16 ink roller in stock; your machine never waits.

Spare Parts →