
Real footage
CAPLA S is a fully automatic shrink wrapping machine that offers an automatic L-seal cutting unit and a shrink heat tunnel as one package. A product placed on the conveyor is wrapped in POF film, cut by the L-blade and shrunk in the heat tunnel — up to 30 packs per minute without operator intervention, about 2.5 seconds per pack. For producers of boxes, books, cosmetics, food and promotional sets who want a steady pace, it is an integrated solution that saves space and cost compared with two separate machines. See the speed and pack quality with your own product at our Istanbul showroom.
Thanks to automatic film feeding and photocell film-length control, it runs integrated into the production line without operator intervention.
Packs up to 30 packs per minute depending on product size; 20 m/min infeed conveyor speed.
Dual photocells reading horizontally and vertically detect the product length automatically; accurate cutting even on thin and small products.
Heat-resistant, non-stick Teflon-coated aluminium cutting blade; gives a smoke-free, burr-free and neat seal seam.
The sealing temperature is precisely controlled by a PID system; consistent results across different film thicknesses.
A stainless steel shrink tunnel with hot-air circulation comes with the machine; there is no need to source a tunnel separately.
The edge film left over after cutting is automatically wound onto the reel underneath; the work area stays clean and film waste is reduced.
A protective cover and audible alarm system are standard.
| Sealing-Cutting Unit (L-Seal) · Capacity | 0–30 packs/min |
| Sealing-Cutting Unit (L-Seal) · Conveyor speed | 20 m/min |
| Sealing-Cutting Unit (L-Seal) · Max. product size | W+H<400 mm, W<350 mm, H<150 mm, L+H<450 mm |
| Sealing-Cutting Unit (L-Seal) · Min. product size | L>100 mm, W>30 mm |
| Sealing-Cutting Unit (L-Seal) · Max. film roll diameter | 300 mm |
| Sealing-Cutting Unit (L-Seal) · Suitable film | POF |
| Sealing-Cutting Unit (L-Seal) · Load capacity | 10 kg |
| Sealing-Cutting Unit (L-Seal) · Power / Voltage | 1.4 kW — 220V 50/60 Hz |
| Sealing-Cutting Unit (L-Seal) · Dimensions (L×W×H) | 1660×890×1440 mm |
| Sealing-Cutting Unit (L-Seal) · Weight | 300 kg |
| Shrink Heat Tunnel · Tunnel size | 1200×450×220 mm |
| Shrink Heat Tunnel · Max. product size (W×H) | 400×180 mm |
| Shrink Heat Tunnel · Conveyor speed | 0–13 m/min |
| Shrink Heat Tunnel · Load capacity | 20 kg |
| Shrink Heat Tunnel · Power / Voltage | 10 kW — 380V 50 Hz (three-phase) |
| Shrink Heat Tunnel · Dimensions (L×W×H) | 1970×1120×1830 mm |
| Shrink Heat Tunnel · Weight | 185 kg |
Why Sonkaya?
We crate, export and deliver our machines to customers around the globe.
Send us a sample of your product; we run it on the machine and send you a video — or visit our Istanbul facility.
Step-by-step commissioning by phone, video and teleconference.
Spare parts and remote technical support, years after purchase.
Visit our test centre in Istanbul with your product and packaging. See the speed and the result before you buy.
For businesses looking for an automatic shrink wrapping machine, the CAPLA S offers L-seal cutting and a heat tunnel in a single package. Choosing an integrated solution instead of two separate devices when investing in a shrink wrapping machine saves both floor space and cost. Sonkaya Makina offers the opportunity to inspect and test the CAPLA S automatic shrink machine on site at its showroom in Istanbul; spare parts and technical service support are provided throughout Türkiye.